GWL320

Wet Location Grid Mount Fixture

Application: Wet Location, Commercial, Sealed Ceiling Areas, Class 100 Clean Room

Available In: LED

LED Spec Sheets: 2FT, 4FT

(IES Files, Lighting Facts, Photometrics, and other info available in downloads area on this page)

Features

• Recessed mounted wet location LED luminaire for 1″ or 1_1/2″ wide inverted T-bar ceilings suitable for class 100 clean rooms
• Wet location
• 0-10V dimming driver standard
• Supports California Title 24 compliance
• Class 100 / ISO Class 5 equivalent

Options

• Full customization available upon request
• Additional lumen packages and color temperatures available
• Controls and sensors available
• Wireless control options available
• Variety of lenses available
• Emergency battery pack available
• Antimicrobial finished housing and door frame available
• Tamper proof screws available

Construction

• 22 ga. cold rolled steel welded housing
• All parts fitted and sealed, no unused holes or knockouts
• 20 ga. cold rolled steel door frame secured by full length piano hinge and 2 captive screws
• Door frame and lens sealed with closed cell neoprene gasket

Finish

• Baked white powder coated finish / welded and painted after fabrication / minimum reflectance 90%

Optical

• Inverted clear prismatic acrylic lens (nominal 0.125) standard

Electrical

• High efficiency drivers coupled with long-life LEDs
• Service life tested at 50,000-51,000 hours (L70)
• Universal voltage 120V through 277V (347V / 480V available)
• Power Factor (PF) greater than 0.9
• Total Harmonic Distortion (THD) less than 20%

Listing

• UL USA and Canada listed / suitable for wet locations / UL listed with sprinkler test

Warranty

• 5-year limited warranty

Downloads