RGHL320

Retrofit Solution for Modular Troffer Luminaires

Application: Commercial, Office, Classroom

Available In: LED

LED Spec Sheets: 2FT4FT

Convert these fluorescent fixtures into LED with this Retrofit Solution: GHL320, MHL320, FHL320

(IES Files, Lighting Facts, Photometrics, and other info available in downloads area on this page)

Features

• LED retrofit kit for 2×2, 2×4 troffer fluorescent luminaires
• 0-10V dimming driver standard (other dimming types available)
• Includes easy-to-read installation instructions
• Pre-punched holes to install the necessary hardware and wiring
• Controls and sensors available
• Supports California Title 24 compliance
• Suitable for damp locations
• Additional lumen packages and color temperatures available

Construction

• 22 ga. Cold rolled steel LED cover tray
• LED cover tray to be secured to the host fixture with provided screws

Electrical

• High efficiency drivers coupled with long-life LEDs
• LEDs for energy efficiency and service life greater than 50,000 hours (L70)
• Universal voltage 120V through 277V (347V / 480V available)
• Emergency battery pack available
• Motion sensor available
• Side wire channel connector available
• LED light engine is pre-wired with a quick connector for easy connection
• Driver-disconnect is provided for disconnecting the electrical supply
conductors to the LED driver

Finish

• Painted after fabrication
• Minimum reflectance 86%

Downloads